More to the definition of ENERGY than we can possibly conceive as yet…..”Faith” not the sort of wistful hope or even hopeful confidence. The term actually referred to a state of complete and certain knowledge of the ultimate laws of cause and effect… the ‘possible human’ goes far beyond Maslov’s hierarchy of needs and Piaget’s stages of child development … http://evolution-intelligentdesign-survival.blogspot.com/2012/04/do-you-believe-in-easter-and-human.html
The universal theme we are all becoming more aware of every dayThe incredible story of how leopard Diabolo became Spirit – Anna Breytenbach, “animal communicator”.
Uploaded by Arjan PostmaI just want to share this message as much as possible without any commercial intent, personal benefit or whatsoever. All used materials and therefore copyrights do not belong to me. I hope you enjoy discovering and watching this story and skill as much as I did. I found the source of this amazing documentary on the following neat cultural site…
MSN 12/27/13 : Crystal Pyramid in the Bermuda Triangle?
More detail on crystals: National Ignition Facility, Crystals, Atlantis
The reader, who has perused these pages carefully and diligently, will already have achieved a degree of understanding sufficient to enable him to predict most of the laws of thermodynamics, which fill hundreds of pages in present day textbooks.
WALTER RUSSELL: “………..Space is not empty — nor is it an ‘ether’. The space which surrounds every particle of matter in every wave field is the negative half of the wave field. The solid nucleus is the positive half. Both halves are equal in potential but vastly unequal in volume……….Science thinks of space either as a void or as an ether through which solids of matter travel. The fact is that space travels with its solids, for each solid is surrounded by a minus zero equal-and-opposite vacuity of the plus zero which we call matter……… Matter floats in these insulating spatial counterparts. Positive electricity is accountable for the solids and negative electricity is accountable for the space. All matter comes out of space by the action of positive electricity and is returned to space by the action of negative electricity. White-hot suns come from the blackness of cold space and cold space radiates from hot suns. The matter of space consists of holes surrounded by corpuscular solids, while the matter of solids consists of small dense cores surrounded by vast tenuous holes of space……..All unfolding and refolding patterns are gyroscopically manipulated, electrically motivated and magnetically measured and controlled………………In the chemical elements, the sharps and flats are isotopes. These can be produced by man in greater numbers than Nature has produced them, for Nature does not begin to split her tones until she has passed two octaves beyond carbon. ….. malleability and conductivity await division in vast quantities from carbon and silicon. These will be found when science discards its concept of matter as being substance, and becomes aware of the gyroscopic control of motion which will split the carbon tone into isotopes as a musical tone is split into sharps and flats………the elements of matter are not different substances, or different things. They are pressure conditions of light waves. The light units of the elements are all alike but are differently conditioned y the electric pressures exerted upon them during the inward or outward spiral journey from zero to zero. The unanswered mystery of how the elements become mathematically precise octave tones, just as musical tones or color tones of the spectrum are mathematically precise in vibration orderliness, lies in the wave field gyroscopic principle………”
Atoms to Galaxies reprint from Lifestyles Unlimited (Sustainable)
The discussions presented are offered in the hope that they may assist the layman, the beginning student, and perhaps even a few of the more advanced students of cosmology – in the achievement of an approach to science which is based upon simple understanding rather than upon the complex and often confusing lattice-work of abstract mathematics which has been erected about it.
While it is true that the language of mathematics is a universal language, it is, nevertheless, a language which must be learned before it can be used or understood.
There are many persons in the world today, who would like to acquire a greater knowledge and understanding of the nature of the universe about them, but who have never had the opportunity to familiarize themselves with the language of mathematics to a degree that would permit them to follow the paths through which this knowledge is customarily presented.
It was principally for these reasons that this article is being written. Consequently, simple discussion, explanation and analogy will be substituted for mathematics, to the greatest possible degree. We will risk, thereby, the scorn of the mathematician, but may gain the gratitude and the comprehension of the non-math student.
Much of the material presented in these pages was taken from a series of lectures originally written and published some years ago, but whose basic concepts are only now beginning to be accepted by cosmologists.
Since the study of cosmology embraces the microcosm as well as the macrocosm, we will begin this text with a consideration of the most minute and fundamental particles of nature, insofar as they are known and understood today. We will examine the forces which bind these particles together, but which may also under certain circumstances, hurl them violently apart.
THE BUILDING BLOCKS
We will begin our examination of the universe by considering, briefly, the nature of four of its most minute and fundamental entities: the neutron, the proton, the electron and the photon (or quantum of energy). No man has been ever seen any of the four. So minute are they, that the most powerful microscope every made could not begin to resolve them. Yet all of the matter in the universe is composed of the first three, and all of the changes which occur in that universe come about as a result of the action of the fourth.
In order to achieve the basic understanding of the nature and properties of the electron, the proton and the neutron, we will arbitrarily create or assume a fourth particle which we will call the ‘nullatron’ (editor’s note: subsequently discovered 10 years later, the neutrino). We will postulate that this particle has no charge, possesses no energy, and consequently is not associated with any type of field. In fact we will assume that this particle has no property other than that of inertial mass, or resistance to acceleration. We hasten to confess that, so far as we know, no evidence of the existence of such a particle is available in our present technology and, because of its dearth of properties, its existence would be exceedingly difficult to demonstrate by any presently know method. Nevertheless, the assumption of such a particle offers an ideal starting point in our examination of the nature of matter, and so we will assume the particle, if only to serve as an aid to understanding.
If, to the nullatron, we add a photon or, as it is more usually known, a quantum of energy, in such a way that the energy is entirely contained within the particle, we will find that the particle has acquired several additional properties. In adding the quantum of energy, we have supplied the particle with both a positive and a negative charge. (See definition of energy in StarSteps, Fuel 2000.) Since these charges are united within the particle, there will be no exterior electrical field, but a gravitational field will be created. This particle, which now exhibits the properties of inertial and gravitational mass, has been named the neutron. Its existence was demonstrated in 1932 by Sir James Chadwick, an English Physicist.
If we could find a means of dividing the quantum of energy into its two component parts, and of drawing the negative charge out of the body of the neutron, so that the charge formed a shell of force around the core, we could convert the neutron into the simplest of all atoms, the atom of the element which we call Hydrogen. The simple particle has now become a rather complex mechanism. The central core which retains almost all of the mass, and from which the gravitational field still emanates, now has a positive electrical charge, and is know as a proton. The shell of force, which consists entirely of the negative portion of the quantum of energy is known as an electron.
In most of our textbooks today, the electron is represented as a small particle in a precise orbit about the proton in much the same manner as the earth orbits the sun. While this analogy works fairly well as long as we confine our study to the field of chemistry, if we attempt to explain all of the observed properties of matter by nuclear hypothesis, we will find that we require a somewhat more complex analogy.
Let us, therefore, attempt to create such an analogy, remembering that, like the nullatron, it is created only as a tool of understanding. We will begin with the usual concept: a small particle in a simple orbit around the proton. We will then assume that the electron is extended or ‘stretched out’ along the path of its orbit until it becomes a ring of charge occupying, simultaneously, all parts of its orbit, but still having the same rotational, or angular velocity. If we now rotate the ring upon an axis which passes through the proton and two opposite points in the ring, we will create a sphere of charge about the proton which is uniform in density but characterized by precise angular velocities about each of the two axes. While the assumption of these angular velocities in not particularly important in our first approach to the nature of matter, they do become necessary to the explanation of some of the more complex phenomena such as crystallization in solids, diffraction of light, etc.
Having examined the atom from inside outward, as it were, by theoretical creation, we should now be better prepared to examine it from the outside inward, as we shall presently proceed to do.
We must remember that the atom which we have created is the simplest of all the atom family. It is known as 1H1 or ‘normal’ hydrogen.
If we add a neutron to the proton which is at the center of this atom, we create a particle called 1H2 or deuterium. This atom is still hydrogen and has chemical properties identical with those of 1H1. The mass and weight, however, are now twice as great. For this reason, 1H2 is frequently referred to as heavy hydrogen.
If we add a second neutron to the nucleus we will have 1H3 or tritium. It is still chemically identical with 1H1 but has three times the mass. It is sometimes known as heavy, heavy, hydrogen.
It becomes apparent that the chemical properties of the element are determined by the number of electrons in the shell and the number of protons in the core.
In the three types of atom which we have considered, each contained one electron and one proton, and all are therefore considered to be atoms of the same element. They are known as Isotopes of the element.
If we attempt to add a third neutron to the nucleus, we will find that the field condition within the atom is now such that a considerable amount of force will be required, and that the act of forcing the neutron into place will cause its quantum of energy to divide spontaneously. The negative charge will be emitted from the neutron, and as a second electron, will join the first in the shell of force surrounding the atom The remaining portion is now positively charged and so becomes a proton.
The atom now contains two electrons, two protons and two neutrons. We have created an atom of the second element in the series called Helium. Its name was taken from the Greek word ‘helios” (The Sun) because it was discovered by a spectrographic analysis of the sun’s atmosphere a quarter of a century before it was discovered on earth.
In symbolic terminology, this atom is described as 2HE4. The letters represent the name of the element, the number preceding the letters gives the number or orbital electrons, and the number following the letters gives the total number of protons and neutrons contained in the nucleus.
If we consider (theoretically) to build up our atom by the addition of neutrons, we will find that, in each step of the process, we can create a certain number of isotopes. That is, we can add a certain number of neutrons without changing anything but the mass of the atom. If we exceed this number, the force required to insert the next neutron will cause it to emit the negative portion of its charge, becoming a proton and adding another electron to the shell. Thus the next higher element in the atomic scale is formed. If we continue this process long enough, we will eventually have created atoms of all the known elements, and all of their possible isotopes.
In building the next element after helium, that is: lithium, we would have to insert two neutrons simultaneously, since there is no known combination of five nuclear particles which will remain together for any appreciable time.
We have described this addition of neutrons to the nucleus as though it were a simple process. Therefore, lest the reader be misled we will hasten to state that we have no means in our present technology of forcing a consecutive series of neutrons into the nucleus of a single atom, and that if we did have such a means, we would find that remarkable changes in energy level would occur during some stages of the building process, resulting in the emission of considerable electro-magnetic radiation, and the loss of a small part of the mass of the atom, even though all of its particles were still present. There are, however, some transmutations of elements which we can, and do, achieve by the simple addition of neutrons. The conversion of Uranium 238 to Plutonium is one example.
It should also, perhaps, be mentioned at this point, that the number of electrons which will occupy a single shell of force is limited. If, after a shell containing this number of electrons has been formed, more electrons are emitted from particles within the nucleus, they will not be absorbed by the shell but will pass through it, to form a second shell outside the first, and so on.
Let us now expand our scale of observation for a moment so that we may consider a drop of ordinary water. If we divide the drop into two equal parts, we will find that each of the two parts retains all of the properties which were possessed by the original drop. Each of the parts is still water. We might repeat this division many times without changing anything except the size of the parts, but eventually we would reach a particle which could not be further divided without producing a complete change in its properties. This particle is called a molecule and is defined as being the smallest particle of a complex substance or ‘compound’ which can exist as that compound.
A molecule is composed of two or more atoms which have come together in such a way that some of the electrons in the outer shells have expanded their orbit so as to create a new shell which encloses all of the atoms. The several atoms will then behave to some extent as though they were one.
If we divide the molecule of water, we find that it is composed of two atoms of our simplest element, hydrogen, and one atom of a somewhat more complex element called oxygen.
The word ‘atom’, as related to particles of matter, originated in the philosophy of ancient Greece. In the fifth century B.C., the Greek philosophers, Democritus and Leucippus, set forth the postulate that all substances are built up of small units which are not capable of further division. They named these particles Atoms, a word meaning indivisible.
In one of the peculiarities of the progress of human knowledge that, although this theory was enunciated more than 2,000 years ago, it is only within recent years that we have come to accept fully the first portion of this concept, and at the same time we have worked vigorously and successfully to disprove the latter portion. We have demonstrated that the atom is not an indivisible particle, but is actually a complex mechanism made up of a number of cooperating parts.
The parts are exceedingly small, even in comparison to the size of an atom. If the orbit of an atom were drawn on an eight by eleven sheet of paper, and the electrons, neutrons, and protons where drawn to true scale, they would be invisible except under the most powerful microscope. The volume occupied by the nucleons (nuclear particles) is considered to be about one million millionth of the total volume of the atom.
We can see that the atom is far from being the solid, indivisible particle which the Greek philosophers imagined. Indeed, the atom is practically all space! It is, however, a space which is filled with powerful fields, and it is the operation of these fields that makes the atom behave as though it were a solid, indestructible particle.
TWO HYDROGEN ATOMS IN SPACE
Having examined the individual atom and learned of its characteristics, let us now consider the effect which atoms will have upon each other, when several are in the same vicinity.
We will picture two hydrogen atoms, side by side, but completely alone in space. We will postulate that the atoms are not in motion with respect to each other, and that no fields or other influences are present except those which are produced by the atoms themselves. We will assume that the two atoms are separated by a distance of two diameters. That is: the distance between the orbits of the electrons is equal to twice the diameter of the orbit.
We have learned that the electron consists entirely of a negative charge and that ‘like charges tend to repel each other’. Therefore, a force field will be set up which will tend to ‘push’ the atoms farther apart. We also know, however, that the proton has a gravitational mass, and consequently, a gravitational field will be created which will tend to pull the atoms closer together.
The mass of the proton is more than 1800 times that of the electron, and the gravitational field is considerably more powerful, if measured at the same distance. However, in the case of the two atoms, the effective distance for the gravitational field must be measured between the protons, while the electrical field must be measured between the closest points of the two orbits. (The full charge of the electron must be considered to act simultaneously in all parts of the orbit.)
At this point we must recall the rule first propounded by Sir Isaac Newton, that the amount of force created by a field is in proportion to the inverse square of the distance separating the two points between which the force acts.
In our example, the two atoms are separated by a distance equal to twice their diameter. If we assume that each atom has the same diameter, and if we choose the radius of the atom as a unit of measurement, we find that the protons are separated by a distance equal to 6 radii; while the shells are only 4 radii apart. The distance ratio therefore is 6 to 4.
We will further assume that at this point, the attraction of the gravitational field is greater than the repulsion of the electrical field. The two atoms will, therefore, begin to approach each other, or to ‘fall together’. When the shells have reached a distance of one diameter, or two radii, we find that the protons are now four radii apart, or that there is now a distance ratio of 4 to 2. If the atoms continue to approach until the shells are 1 radius apart, the distance between the protons will be three radii, or a ratio of 3 to 1, etc.
We can readily see that, whatever the relative strength of the two fields to begin with, there will be a distance at which the attraction of the gravitational field will be exactly balanced by the repulsion of the electrical field. We will call this the ‘critical distance’. We cannot call it the stable distance because the atoms would not actually stop at this point. In falling together, the atoms would have acquired momentum, and this momentum would carry them inward to a point where the repulsion was greater than the attraction. Then the atoms would ‘bounce’ apart and because of acquired momentum, would again pass the critical distance in their outward movement. Since the atom may be considered as a perfectly elastic body, and since no friction is involved, this bouncing back and forth, or oscillation, as it is usually called, can and does continue indefinitely, each atom constantly seeking it critical distance, but always being carried beyond it by the momentum of its search.
Even if it were possible to place two atoms exactly at their critical distance without imparting any momentum to them, they would not remain long in that position because there is a factor which almost constantly changes the critical distance between atoms. This factor is known as the photon or quantum of energy. The word photon is derived from the Greek word “photos’ meaning light. It was chosen because light was the first form of energy which was shown to be composed of definite units.
As our understanding of nature progressed, however, it became apparent that what we call ‘light’ is simply a form of electromagnetic radiation.
Electromagnetic radiation may be defined as ‘Primary energy’, since all of the changes which occur in matter come about, either as a direct or as a secondary effect of its action.
This primary energy is divisible into very small, but definite units or particles which have been given the name of ‘quanta’ in the plural, or quantum, in the singular.
The quantum is considered to be an indivisible particle of energy, but one whose energy level is determined by its individual frequency.
The known spectrum of electromagnetic radiation covers a tremendous range of frequencies, from long radio waves on the low end, to high energy cosmic rays, on the other.
Near the center of this spectrum is a narrow band of frequencies, covering about one octave, which we call ‘visible light’ because radiation of these frequencies can be perceived by the human eye. We divide this band of frequencies into seven narrower band which we call colors. Starting from the highest frequency and going down, we name these colors violet, indigo, blue, green, yellow, orange and red. All of the hues, shades, and tints of color which the human eye can perceive are created by some combination of these seven frequencies.
It was the quantum, or individual particle of radiation in this particular portion of the frequency spectrum to which the term photon was originally applied. The usage of the term, however, has since been expanded to include a considerably wider band of frequency.
Just below the red of visible light is another, and somewhat wider band which we call infrared. Except for the fact that its frequency is below the range of the human eye, infrared has all of the characteristics of visible light, plus the characteristic that its photons are readily absorbed by the electronic shell of force about an atom.
Each different type of atom, of course, has its own characteristic set of frequencies, and only photons in matching frequency bands will be absorbed. However, most of the photons whose frequency lies within the infrared portion of the spectrum are readily accepted by almost all types of atoms. It is, therefore, with these infrared photons that we are particularly concerned at the moment.
Let us now return for a time to our two hydrogen atoms. We will assume that a proton of infrared radiation, emitted perhaps millions of years before from as star millions of light years away in space, strikes the shell of force about one of our two atoms. If the photon is absorbed, the additional energy thus gained, will cause the shell of force to expand. The expansion of the electronic orbit places the electrons closer together than they were before, while the distance between the protons remains the same. If the two atoms had been poised exactly at the critical distance prior to the absorption of the photon, we would now find that a net repulsion existed, and the two atoms would ‘bounce’ apart seeking the new point of stability, or critical distance where the two fields would again be in balance.
The shell of the atom does not, however, retain these photons indefinitely, but is constantly emitting them. With each emission, of course, the shell becomes one size smaller.
The mean time between successive emissions is determined by two factors, first the nature of the particular atom, and second by the number of photons which are present in the electronic shell. Each time the shell receives a photon its diameter increases by a precise amount, and with each emission it shrinks by the same amount.
If the number of photons received within a given time, is greater than the number emitted, the two atoms will constantly tend to move farther apart. If the number emitted is greater, the atoms will tend to move closer together. If we now learn that the photon of infrared radiation is also know as the unit of radiant heat, we immediately find that we are able to predict one of the fundamental rules of nature, which is that the addition of heat energy to a body of matter will tend to cause that matter to occupy a larger volume of space, or in simple words to expand. The loss of heat energy from a body of matter will tend to cause that matter to occupy less space, or to contract. We can make this prediction confidently, even though we may never have heard of this rule or observed it in operation.
A number of other rules of nature may also be predicted through the consideration of the foregoing discussion. Some of these will be mentioned later on in this text.
Let us now assume that each of our two atoms receive a number of photons simultaneously. The orbits of the electrons, in springing outward, would approach very near to each other, and thus produce a very strong repulsion between the atoms. This repulsion would cause an outward movement of the atoms, with a very high rate of acceleration. By the time they had reached their new critical distance, their velocity might be so great that they would continue to move apart indefinitely. As soon as they had passed the critical distance, of course, the repulsion would become an attraction, and the outward motion of the atoms would begin to slow down. As they moved apart, however, because of the increasing distance between the protons, the attraction would also become constantly smaller.
We can see that if the atoms had achieved a sufficiently high original velocity, the attraction would diminish at a greater rate than the velocity, so that there would always be some outward velocity remaining. The minimum velocity at which this continuous expansion would occur, is known as the ‘escape velocity’ of the atom.
We have often heard the term, escape velocity, used in connection with the firing of rockets to the moon or to some planet. In this case it is defined as the minimum original velocity which must be imparted to a missile if it is to escape completely, from the gravitational field of the earth. The principle is exactly the same. The gravitational field of the earth exerts a retarding force upon the missile, which constantly slows its outward motion. This retarding force, however, diminishes steadily as the distance from the earth increases, so that if the original velocity is sufficiently high, the retarding force will diminish more rapidly than the velocity, and the missile will continue on and on until it comes into the influence of some other gravitational field and begins to accelerate in that direction.
The velocity of escape from the earth is usually given as being between 7 and 9 miles per second depending upon whether the missile is being fired toward the moon or away from it: whether it is being fired in the direction of the earth’s rotation or in the opposite direction: the position of the sun, whose gravitational field produces its own effect upon the trajectory of the missile; and several other minor factors.
In the case of the atom, the velocity of escape depends upon the type and mass of the atom, its temperature, the number and position of other atoms present, etc. It is, however, always a precise velocity for any given type of atom under any given set of conditions.
So far, in our examination of the nature of matter, our entire universe has consisted of two lonely hydrogen atoms. By the examination of these two atoms, however, we have learned something of the basic forces which actuate all atoms, whatever their size or number.
As long as we are dealing with only two interacting atoms, we are observing absolute forces and specific actions which result therefrom. If we add a large number of other atoms to our original two; as we must if we are to build matter from our atoms, all that we can observe is the statistical result of a large number of forces and actions, each of which is absolute in itself, but contributes only minutely to the resultant action of the whole.
Almost all of our present laws of physics are based upon the observation of the statistical results of a very large number of individual atomic or molecular actions. If we do not understand the individual forces and actions, we have no means of understanding the statistical result of many actions, and so can learn physics only by memorizing blindly the observed results of certain conditions. It is for this reason that we have spent so much time in observing our two atom universe, but we should now be ready to furnish our lonely atoms with some companions.
If we examine the illustrations to follow at the conclusion of this brief, we will see that the two atoms with which we have become so familiar, are now surrounded by many other similar atoms. We will assume that our two friends have just absorbed some photons of energy, and are ‘bouncing’ apart. We can see that before they have gone very far, each of them will intrude upon the critical distance of some other atom, and will bounce from that atom in a direction which will be determined by the angle at which the impact occurred. The atom which was ‘struck’ would, of course, acquire some of the momentum of the striking atom, and its own path and velocity would be altered accordingly. We could create much the same effect of we were to place a large number of billiard balls upon a billiard table, and rush about it with a cue stick, rapidly striking various balls at random, and in different directions. The balls struck would acquire velocity (kinetic energy), some of which would be transmitted to the first ball which it struck. If we moved fast enough, we would soon have all of the balls in constant motion.
The air friction, the rolling friction on the table, and the fact that the balls are not perfectly elastic, would all tend to slow the balls down. Therefore, if we assume that our strokes are all of uniform amplitude, the average speed of the balls would be proportionate to the number of strokes which we delivered in agiven unit of time.
In the case of the atoms, the cue strokes are represented by the photons which they absorb. There is no friction, and the atoms can be considered as being perfectly elastic bodies, but the slowing effect is still present because of the fact that the atoms constantly emit photons as well as absorb them.
By comparison with our billiard table experiment, we can see that the average velocity of the atoms will be proportionate to the total number of photons per unit volume, which are in circulation at any given moment.
If two or more atoms have combined to form a molecule, the outer shell of electrons which now encloses all of the atoms, absorbs the photons and produces an effect much the same as in the case of individual atoms.
There are, of course, other means by which the velocity of atoms or molecules may be increased. These means will be considered in the following chapter.
TEMPERATURE AND HEAT
The term “temperature’ and ‘heat’ are often confused in the mind of the beginning student. In most text books on physics the statement is made that the ‘temperature’ of a body of matter is the measure of the rate of motion of its particles. In simple words, a body of matter is said to be at a high temperature when the atoms or molecules which compose that body are moving at high velocities, and therefore coming into frequent and violent collision with their neighbors. The temperature is said to be low when the particles are moving at low velocities and the collisions are relatively gentle. If the motion should cease entirely, the matter would be said to be at the temperature of absolute zero.
Since all atoms and molecules emit photons so long as any are contained within their electronic orbits, and since the emission or absorption of a single photon will cause oscillation which will ultimately be transmitted to all parts of the matter, it seems obvious that a body of matter can never reach a true state of absolute zero unless all emittable photons have been lost from the body, and no more are being received from any other source. But as all bodies of matter at temperatures above absolute zero are constantly emitting photons and since these photons travel endlessly through space until they are absorbed by matter, it seems unlikely that any appreciable body of matter has ever reached a true state of absolute zero, although the condition has been approached quite closely in laboratory experiments.
Each atom emits photons at a rate that is proportionate to the total number of photons which it contains. This ratio is the same for all atoms of a given element, but varies with each different type of atom or molecule.
Suppose that we have an atom of hydrogen, and an atom of mercury. Let us assume that the atom of hydrogen emits one photon per second for each ten photons contained in its electron shell. The atom of mercury, on the other hand, emits one photon per second for each two photons contained. We can see that if we added one hundred photons to an atom of mercury, we would increase its emission rate by 50 photons per second, but if we added one hundred photons to an atom of hydrogen we would raise its emission rate by only ten photons per second.
We have added exactly the same amount of heat energy to each atom but have raised the emission rate of the mercury atom five times as much as that of hydrogen atom. Since the temperature of a body of matter is proportionate to the emission rate of its atoms, by adding the same amount of heat to each, we will raise the temperature of the mercury much more than that of the hydrogen.
The total kinetic energy possessed by the particles of a body of matter, is known as the active heat of the body, while the total number of photons still contained within the electron shells of the particles is known as the latent heat of the body. The ratio between the active heat and the total heat energy of a body of matter is know as the ‘Specific’ heat of the material of which the body is composed.
The figures which we have given for the emission ratio between hydrogen and mercury are not, of course the correct ones. To give precise figures for these two elements we would have to deal in micro- seconds instead of seconds, and employ figures with a number of decimal places. We have used simple figures only for the purpose for forming mental pictures of what goes on in, and between, the atoms, in order to gain a better understanding of those often confused terms, ‘temperature’ and ‘heat’.
The specific heat of each element is different, and also changes when the elements join to form compounds. That is, when atoms join to form molecules, a change occurs in the amount of heat which must be added in order to raise the temperature to a given degree.
Every element and every compound, however, has a precise ratio of specific heat. Many of these can be found in any handbook on physics or chemistry. The specific heat of water (h20) has been chosen as the standard or reference point. Its specific heat is, therefore, said to be 1.000. Since the specific heat of water is high compared to most other compounds or elements, the values of the others are shown as decimal fractions of one.
As we mentioned at the end of the last chapter, the emission or absorption of photons is not the only means of changing the velocity, and therefore the temperature, of atoms or molecules. Obviously, any application of kinetic energy to the particles will have the same effect.
Let us imagine that a blacksmith is striking his anvil with a hammer. As the face of the hammer comes in contact with the face of the anvil, the outer layer of particles on the face of the hammer, because of their momentum, will intrude upon the critical distance of the outer layer of particles on the face of the anvil. When the repulsion caused by this intrusion tends to halt the forward motion of the first layer of particles, the second layer, which has equal momentum, will intrude upon the critical distance of the first, the third layer will intrude upon the second, and so on throughout all of the trillions of layers of particles in the hammer. A compression wave will be produced which will race back and forth through both the hammer and the anvil until the linear kinetic energy of the hammer has been converted to a proportionate increase in the random velocity of the particles of both masses. We can see that the temperature of the masses would be increased by an amount which is directly proportional to the momentum of the hammer.
If instead of striking the anvil, we were to rub the face of the hammer against the anvil the same effect would be created. Since the surfaces are not perfectly smooth, projections from one surface would interlock with projections from the other. Large numbers of particles would be forced from their normal positions. Some of these would snap back into place when the opposing projection has passed, and some would be torn away entirely. In either case however, the temperature of the mass would be increased by an amount which was proportionate to the force applied to the hammer, and the distance which it was moved.
The striking of the anvil would be described as ‘work by impact’ while the rubbing action would be described as ‘work by friction’.
SOLIDS, LIQUIDS AND GASES
Before going farther in our study of the phenomenon which we call heat, it might be well to consider briefly, the three states of matter which result from the various degrees of heat energy or temperature which the matter may possess at a given time.
Let us consider first, a quantity, or block of atoms or molecules in which the total number of photons contained is small. The orbits of the electrons, and therefore the size of the atom is also small. The oscillation or ‘bouncing’ of each atom will continue, but the path of each bounce will be small because the atoms or molecules are quite close together, and their critical distance is small. Since none of the particles reach escape velocity, each particle will remain in the same relative position with respect to the others. The mass will retain its shape indefinitely, and a considerable amount of outside force would have to be applied to cause the body to change in shape. This condition is known as the solid state of matter.
If, to such a block of matter, we suddenly added a large quantity of energy in the form of photons, the orbits of the atoms would spring outward, the velocity of their oscillation would increase tremendously, and soon every particle would acquire a velocity greater than its escape velocity. The particles in the interior of the mass could not immediately escape because they would still be bouncing about among their neighbors, but the field of each particle would now be repelling all of its neighbors, and the mass would expand rapidly. The particles on the outside of the mass would move outward indefinitely, leaving the next layer free to escape and so on. Matter in this condition is known as ‘gas.’
Specifically, a gas is defined as being a body of matter in which all, or virtually all of its particles have velocities in excess of the escape velocity for the particular conditions in which they exist.
We can readily see that a gas, if released in a vacuum, will expand indefinitely, and if released within a solid container will expand until it is uniformly distributed throughout the volume of the container. Each atom or molecule, upon colliding with another, will glance off in a new direction, and will continue in that direction until another collision occurs.
The average, or ‘mean’ distance which a particle travels between such collisions is know as ‘the mean free path.’ In a dense, or ‘compressed’ gas the mean free path would be a very tiny fraction of an inch, but in a very rarified gas, it might be many feet.
The liquid state of matter is not, in the strictest sense of the word, a true state of matter at all because it is dependent almost entirely upon exterior influences, such as the earth’s gravitational field, its atmospheric pressure, etc. If we were to take a sample of almost any liquid to a remote point in space where there were no gravitational fields or atmosphere to affect the sample we would find that, even though we maintained the temperature at the same level, the liquid would have the characteristics either of a soft solid or of a gas.
A liquid can be defined as a body of matter whose particles have velocities either slightly below or slightly above their natural escape velocity. Most oils or liquid metals, for instance, can be described as matter whose particle velocities are so close to that of escape that the additional force applied by a gravitational field such as that of the earth is sufficient to cause the particles to escape, or ‘flow’ in the direction of the force applied by the field. If such matter were removed from the influence of exterior fields, and released in space, it would immediately assume the shape of a sphere, which shape it would retain indefinitely so long as no exterior force were brought to bear. It would, therefore have the characteristics of a very soft solid.
A glass of ordinary water, on the other hand, has the characteristics of a gas, which is prevented from expanding by the pressure of the atmosphere around it.
We can demonstrate this if we take a glass of water which is at, say 100 degrees Fahrenheit, place it in a bell jar, and suddenly remove the air from the jar. The water will immediately begin to boil quite briskly. If we maintain the temperature of the water at 100 degrees and pump out the gas as it is formed, the glass will soon be empty, demonstrating that its particles do have velocities above those necessary for escape. Actually, even though we do not remove the air, molecules of the water will constantly be escaping from the surface in spite of the downward bombardment of the air molecules, and the glass would eventually become empty. This, much slower process of escape by the mingling of the molecules of a liquid with the molecules of a surrounding gas is known as evaporation.
In any standard text- book on physics, three methods of heat transfer are usually discussed. These three types of heat movement are known as, conduction, convection, and radiation. Conduction is defined as being the transfer of heat energy from particle to particle in a solid substance.
Convection refers to the transmission of heat, usually in a gas or liquid, where the heat is carried from one point to another by the motion of the gas or liquid which contains it.
Radiation, of course refers to the transmission of heat by the emission of photons, or quanta of heat energy.
In order to gain a simple understanding of heat transfer from the nuclear standpoint, let us perform an imaginary experiment, in which all three of these types of transfer.
We will clamp a bar of iron in a machinist’s vise, and to the upper end of the bar, we will apply the flame of an oxy-hydrogen torch.
When two atoms of hydrogen combine with an atom of oxygen, a molecule of ordinary water is formed, but the joining of the atoms causes a large number of the photons of energy contained in the atoms, to be emitted almost instantaneously. The water which is formed, instead of appearing as a liquid, becomes a gas at a tremendously high temperature. The gas is emitting large numbers of heat quanta, and also a few of the higher frequency photons which we call light.
The heat quanta, striking and being absorbed by the atoms of iron in the bar, cause a great increase in the velocity of their motion. The molecules of the gas, of course, have velocities far above that of escape, and as these molecules strike the particles of iron, a large percentage of their kinetic energy is transmitted mechanically, just as the motion was transmitted by the balls of our billiard table experiment. The energy which is transmitted from particle to particle within the bar itself is known as conducted head.
Since the incandescent gas is moving from the point of combustion at the tip of the torch, to the surface of the iron, its motion is carrying its supply of kinetic energy to the surface of the iron. This process is described as ‘convection’ because the heat is being ‘conveyed’ from one point to another by the motion of the gas which contains it.
The photons of infrared energy which are emitted at the point of combustion, do not, of course, follow the flow of gas, but radiate in all directions at the velocity of light until they strike and are absorbed by the iron, or some other body of matter. This type of heat transfer is, therefore, known as ‘radiation.’
The iron bar, while it is receiving a very large flow of photons from the gas, it also, at the same time, emitting a smaller number. We can demonstrate this by continuing to direct the flame upon the surface of the bar. As the temperature of the iron rises, the frequency of the photons which it emits will also increase until finally some of the photons will have frequencies in the lower part of the visible spectrum, and we say that the bar is becoming ‘red hot.’ If we add still more heat, the frequency of the emitted photons will continue to increase and we will see that the bar has become white hot.
The iron particles are now approaching their escape velocity. If we continue to add heat, we will soon find that the force of the earth’s gravity will be sufficient to cause those particles, which are moving in the direction of its attraction, to move beyond their normal range. The mass will begin to move, or ‘flow’ in the direction of the gravitational attraction. When this occurs, we say that the iron has ‘melted.’
Having observed the transfer of heat from a gas to a solid, by heating the gas, let us see if we can raise the temperature of a gas without adding any heat.
We will imagine a simple steel cylinder, closed on one end, and with a closely fitting piston in the other. Through a small hole in the closed end we will insert the bulb of an ordinary mercury thermometer, sealing it so that no gas can escape from the cylinder. If we allow this apparatus to rest quietly upon a table in our laboratory, and maintain a constant air temperature in the room we will find that the air inside the cylinder, the air outside the cylinder, and the material of the cylinder itself will soon reach the same temperature. If we now suddenly push the piston halfway down in the cylinder, so that the gas within is compressed to half of its original volume, we will find that the temperature of that gas has risen sharply. The total number of photons in circulation has not increased, but because the volume has been reduced, more photons are in circulation per unit volume. This means, of course, that the walls of the cylinder, which are in contact with the gas, will receive more photons, per unit area, than they were receiving before the gas was compressed. The walls of the cylinder are, therefore receiving heat energy from the gas.
The total kinetic energy of the gas within the cylinder also remains the same, but because of the compression, the mean free path of the particles is shortened. Collisions become more frequent and more violent. This increase of oscillation rate is also transmitted to the walls of the cylinder.
Since the bulb of the mercury thermometer, which we inserted into the cylinder, is surrounded by the compressed gas, a proportionate amount of the energy will be conducted to the mercury in the bulb, causing it to expand. By observing the amount of expansion of the mercury, we can measure the rise in temperature caused by the compression of the gas.
The extra heat absorbed by the walls of the cylinder will gradually be passed along to the air outside, until the gas inside has reached its original temperature. It now, however, contains less heat than it had before. By compressing the gas, we have literally ‘squeezed’ some of the heat out of it.
If we now draw the piston out to its original position, the gas will expand to fill its original volume. The mean free path of the particles will be lengthened, the collisions, will be fewer, and the number of photons emitted, per unit area will be smaller than the number which the gas received from the walls of the cylinder. In other words, its temperature has gone down, and the gas is now taking back from the cylinder, the heat which it gave up when it was compressed. A proportionate amount of heat will, of course, also be taken from the bulb of the thermometer, causing the mercury to contract, and thus to indicate the lower temperature.
Almost all of the commercial and household refrigeration systems in use today are based upon the principle of compressing a gas in one part of the system, dissipating the heat released at that point, and then allowing the gas to expand in another part of the system, so that it will continuously take up heat from that part.
In our experiment with the cylinder and the piston, we discovered that a considerable amount of force was required to push the piston into the cylinder. Much more than that would be required to over come the friction between the piston and the cylinder. We also noted that as long as the gas was compressed, a force continued to act upon the piston, tending to push it back out to its original position. We can readily understand why this should be so. In fact, even our brief consideration of the actions of gas particles has enabled us to predict that it would be true, even before we performed the experiment.
When the surface of a solid is in contact with a gas, the particles of the gas because they are moving at random in all directions, are constantly impacting, or beating upon the particles of the solid. The millions of tiny impacts which occur each second, produce a constant thrust or force upon the surface of the solid. We call this force ‘the pressure’ of the gas.
We can see, at once, that the amount of this pressure, upon a given area will be determined by three factors. First – the number of particles which strike the given area in a given time. Second – the velocity of the striking particles. Third – the mass of the striking particles. We can also see that the number of particles which will strike a given area in a given time will be determined by the number of particles contained within a give volume of the gas, and upon the rapidity with which they oscillate.
These facts bring out the close relationship which exists between temperature and pressure in a gas.
Stated as briefly as possible, the temperature is the measure of the total kinetic energy present, per unit volume, while the pressure is the force which that kinetic energy exerts, per unit area, upon any restraining surface.
For example, the air which we breathe is a gas composed principally of two elements, oxygen and nitrogen. But for two preventative factors, all of the earth’s atmosphere would long since have been diffused into space. The first factor is the earth’s gravitational field, which constantly tends to draw all of the particles back to the surface. The second is the fact that the particles at the outer edge have lower temperatures and therefore lower velocities than those near the surface.
If we assume that we are at sea level, and that the temperature of the air is 0 degrees centigrade (32 degrees Fahrenheit) the number of particles in each cubic inch of space will be about 400 quintillion. (400, million, million, million.) The average velocity of the particles will be about 1,760 feet per second, or twenty miles per minute. This velocity becomes even more remarkable when we realize that average distance which any of these particles can travel before colliding with another is only about four millionths of an inch. This means that each particle undergoes an average of more than five billion collisions per second. The kinetic energy of these collisions is sufficient to produce a constant force of 14.7 pounds upon each square inch of surface which receives these impacts. This is why we say that the air pressure at sea level is equal to 14.7 pounds per square inch.
We can readily see that the individual forces and masses of atomic or nuclear particles are exceedingly small when compared to our usual standards of measurement. Most of the quantities with which we must deal in the study of nuclear physics are so infinitesimal in comparison with our everyday standards, that it has been necessary to create new and much smaller units of measure in order to deal readily with these minute quantities.
Since these standards of measure may readily be found in any test book, we have not dealt with them here. We have considered the photon, the neutron, and the electron without determining their size or mass. We have discussed the constant rapid motion of the atom without measuring the particles, the length and their mean free path, or the frequency of collision (except for the one example, air, which we have just considered.) All of these quantities are listed in handbooks, created for the engineer or the physicist who must obtain specific answers to specific problems. In this text we are primarily concerned with bringing about a simple understanding of the significance of these factors, and the conditions which cause them to exist.
The reader, who has perused these pages carefully and diligently, will already have achieved a degree of understanding sufficient to enable him to predict most of the laws of thermodynamics, which fill hundreds of pages in present day textbooks.
We will therefore take leave of our particles for a time in order to consider a few of the least understood factors of nature, gravity, space and time.
…….. continued in links below
Peter Jocis Facebook Forward
To Inquiry Lab: Questions on … “Field Propulsion”
I note excellent progress through the massive maze of miss-interpretations in Physics’ Standard Model of Reality have been advanced mathematically by the Haramein / Rauscher models. Simplifying through the use of geometry and frequency as common denominators, both the quantum and relativistic fields are beginning to merge, with more precise results.
Extracts on some of the more predominant issues addressed in the Haramein / Rauscher models are reprinted below for further reference and contrast to StarSteps views towards field propulsion basics and application.
While the Haramein / Rauscher models add clarification details of the vacuum, paving the path to unlimited energy access at any point, progress towards application of field propulsion has remained stagnant since the 1940s, in spite of the Dual Torus 4 Blackhole / Yin & Yang merger recognition.
As measurement has no meaning except and unless measurement is taken between two or more specified reference points, I again question the role the quantity C, (VC energy differential), plays between any two or more specified reference points. (QC is the zero point energy differential in the sine wave of the yin yang symbol – defined as the maximum differential which can exist between two reference points in the factor which we call matter, or also defined as the minimum differential which can exist between a reference point in matter, and one in energy. This is only true, however, when the reference point in matter is at the same energy level as the observer).
– Walter Russell’s “the speed of light is the limit at which motion can reproduce itself in curved wave fields before reaching zero where motion and curvature cease)
In the next post we will look at a simplified interpretation, of atoms to galaxies (4th grade layman’s level), from which the most advanced studies of physics can be extrapolated and predicted, devoid of outlandish pseudo interpretations.
Review to date:
Quantum Gravity and the Holographic Mass Nassim Haramein1* ABSTRACT Published 27 April 2013 http://resonance.is/explore/quantum-gravity-and-the-holographic-mass-trailer-and-press-release We find an exact quantized expression of the Schwarzschild solution to Einstein’s field equations utilizing spherical Planck units in a generalized holographic approach. We consider vacuum fluctuations within volumes as well as on horizon surfaces, generating a discrete spacetime quantization and a novel quantized approach to gravitation. When applied at the quantum scale, utilizing the charge radius of the proton, we find values for the rest mass of the proton within 0.069×10−24 gm of the CODATA value and when the 2010 muonic proton charge radius measurement is utilized we find a deviation of 0.001×10−24 gm from the proton rest mass. We identify a fundamental mass ratio between the vacuum oscillations on the surface horizon and the oscillations within the volume of a proton and find a solution for the gravitational coupling constant to the strong interaction. We derive the energy, angular frequency, and period for such a system and determine its gravitational potential considering mass dilation. We find the force range to be closely correlated with the Yukawa potential typically utilized to illustrate the exponential drop-off of the confining force. Zero free parameters or hidden variables are utilized.
A Scaling Law http://hiup.org/wp-content/uploads/2013/05/AIP_CP_SProton_Haramein.pdf
The Rotational Dynamics in Haramein-Rauscher Metrics and the Monopolic Current http://www.tonyb.freeyellow.com/id124.html
COLLECTIVE COHERENT OSCILLATION PLASMA MODES IN SURROUNDING MEDIA OF BLACK HOLES AND VACUUM STRUCTURE – QUANTUM PROCESSES WITH CONSIDERATIONS OF SPACETIME TORQUE AND CORIOLIS FORCES N. Haramein¶ and E.A. Rauscher§ ¶The
Resonance Project Foundation, firstname.lastname@example.org§Tecnic Research Laboratory, 3500 S. Tomahawk Rd., Bldg. 188, Apache Junction, AZ 85219 USA
Maxwell’s equations  or the Schrödinger equation . The imaginary terms in these equations can be utilized to describe soliton coherent states. In reference , the effects of the actual coherent states and its application to the vacuum can be made. Boyer details the field theoretic approach to describe vacuum processes . Also the experimental test of the existence of zero-point fluctuations is detailed, such as the Lamb shift, Casimir effect, and possible effects on long-range electromagnetic fields [41,42]………….. The role of vacuum energy processes –Very energetic processes cohere the vacuum and create real physical effects. The question is if one can enhance this coherence and utilize it to optimize macroscopically observable “energy shifted” states. It is clear that the vacuum plays a role in physically realized states. The question then becomes, can we enhance the role of the vacuum to form interesting and utilizable processes in materials with coherent excitations that would be observed as apparent ambient superconducting states . Let us briefly give another example of the role of the vacuum in physical theory, for example in chromoelectrodynamics theory, where we represent the properties of the vacuum as a form of soliton called an instanton which is a time-dependent entity rather than space-dependent like a soliton. We treat the relationship between quantum electrodynamics, QED and quantum chromodynamics in separate papers [4,43-45]. In the chromodynamics theory of elementary particle physics, the charged particles are quarks and their fractional charge is called the “color” quantum number. The field quanta by which the quarks interact are called gluons. Instantons arise out of the solutions that describe the forces in the chromodynamic field. They are properties of the vacuum. Since the vacuum is defined as “zero energy” they are essentially “pseudo-particles”. But instanons have a real physical effect; in their presence the gluons “feel” forces arising from the non-empty vacuum [4,44,45]. Solitons are coherent in space and instantons are coherent in time. In work in progress, we address the strong force and color force as consequences of a quantum gravity where a torque term and Coriolis effects are incorporated in the Hamiltonian of a nonlinear Schrödinger equation.
Gravitational potential and mass dilation drop off: Physical Review & Research International, 3(4): 270-292, 2013 fig. 1. (a) The relativistic gravitational potential U resulting from mass dilation near the horizon r . (b) The Yukawa potential U typically given as the short range energy potential of the strong force where å is the hard-core surface potential and k is the inverse screening length (inverse Debye length) From Fig. 1(a) we find that the gravitational potential from the mass dilation of a proton due to the angular velocity of an accelerated frame generates an asymptotic curve with a force potential drop-off as a function of r characteristic of the short range force of nuclear confinement equivalent to the Yukawa potential in Fig. 1(b). Therefore, we have derived a relativistic source for the confining energy with a quantum gravitational potential equivalent to the unification energy of a Schwarzschild mass or the holographic gravitational mass of the proton mh′ , yielding a gravitational coupling with a Yukawa-like short range, and the appropriate interaction time of the strong force tp , resulting in an analytical solution to confinement. These results are derived from first principles and classical considerations alone, with zero free parameters or hidden variables,
and extend our generalized holographic solution to generate a complete picture of confinement whether at the quantum scale or the cosmological scale of black holes. …………..We have generalized the holographic principle to considerations of
spherical tiling of Planck vacuum fluctuations within volumes as well as on horizon surfaces. From these discrete spacetime quantization relationships we extract the Schwarzschild solution to Einstein’s field equations, generating a novel quantized approach to gravitation……………….As a result, we predict a precise proton charge radius utilizing our holographic method which falls within the reported experimental uncertainty for the muonic measurement of the proton charge radius. More precise experiments in the future may confirm our predicted theoretical proton charge radius. We determine a fundamental constant ö defined by the mass ratio of vacuum oscillations on the surface horizon to the ones within the volume of the proton. As a result, clear relationships emerge between the Planck mass, the rest mass of the proton, and the Schwarzschild mass of the proton or what we term the holographic gravitational mass.
Physical Review & Research International, 3(4): 270-292, 2013 In 1916, Karl Schwarzschild published an exact solution to Einstein’s field equations for the gravitational field outside a spherically symmetric body [1,2]. The Schwarzschild solution determined a critical radius, rs for any given mass where the escape velocity equals c , the speed of light. The region where r = rs is typically denoted as the horizon or event horizon and is given by the well known definition 2Gm r= (1) where G is the gravitational constant, and m is the mass. John Archibald Wheeler in 1967 described this region of space as a “black hole” during a talk at the NASA Goddard Institute of Space Studies. In 1957 Wheeler had already, as an implication of general
relativity, theorized the presence of tunnels in spacetime or “wormholes” and in 1955, as a consequence of quantum mechanics, the concept of “spacetime foam” or “quantum foam” as a qualitative description of subatomic spacetime turbulence . The theory predicts that the very fabric of spacetime is a seething foam of wormholes and tiny virtual black holes at the Planck scale as well as being the source of virtual particle production. In Wheeler’s own words: “The vision of quantum gravity is a vision of turbulence – turbulent space, turbulent time, turbulent spacetime… spacetime in small enough regions should not be merely “bumpy,” not merely erratic in its curvature; it should fractionate into ever-changing, multiply- connected geometries. For the very small and the very quick, wormholes should be as much a part of the landscape as those dancing virtual particles that give to the electron its slightly altered energy and magnetism [Observed as the Lamb shift].”  On the cosmological scale, black hole singularities were initially thought to have no physical meaning and probably did not occur in nature. As general relativity developed in the late 20 century it was found that such singularities were a generic feature of the theory and evidence for astrophysical black holes grew such that they are now accepted as having physical existence and are an intrinsic component of modern cosmology. While the Schwarzschild solution to Einstein’s field equations results in extreme curvature at the origin and the horizon of a black hole, it is widely utilized to give appropriate results for many typical applications from cosmology to planetary physics. As a result, clear relationships emerge between the Planck mass, the rest mass of the proton, and the Schwarzschild mass of the proton or what we term the holographic gravitational mass. Further, we find that our derived fundamental constant 4ö2 generates the gravitational coupling constant to the strong interaction, thus defining the unification energy for confinement. We also derive the energy, angular frequency, and period for such a system utilizing our generalized holographic approach. We find that the period is on the order of the interaction time of particle decay via the strong force which is congruent with our derivation of the gravitational coupling constant. Moreover, the frequency of the system correlates well with the characteristic gamma frequency of the nucleon decay rate. Finally, we compute the gravitational potential resulting from the mass dilation of the system due to angular velocities as a function of radius and find that the gravitational force of such a system produces a force range drop-off closely correlated with the Yukawa potential typically utilized to define the short range of the strong interaction. We demonstrate that a quantum gravitational framework of a discrete spacetime defined by spherical Planck vacuum oscillators can be constructed which applies to both cosmological and quantum scales. Our generalized holographic method utilizes zero free parameters and is generated from simple geometric relationships and algebra, yielding precise results for significant physical properties such as the mass of black holes, the rest mass of the proton, and the confining nuclear force.
Physical Review & Research International, 3(4): 270-292, 2013 The current QCD approach accounts for the remaining mass of the proton by the kinetic back reaction of massless gluons interacting with the confining color field utilizing special relativity to determine masses. Yet it is critical to note that after almost a century of computation, there is still no analytical solution to the Lattice QCD model for confinement. This problem is thought to be one of the most obscure processes in particle physics and a Millennium Prize Problem from the Clay Mathematics Institute has been issued to find a resolution [23,24]. Since there is no analytical solution to LQCD and no framework for the energy source necessary for confinement, associating the remaining mass of the proton to the kinetic energy of massless gluons is based on tenuous tenets. Our results demonstrate that the holographic gravitational mass-energy of the proton mh′ is the unification energy scale for hadronic confinement and that the mass of nucleons is a direct consequence of vacuum fluctuations. Keeping in mind that a neutron quickly decays into a proton when free of the nucleus, we have therefore addressed the fundamental nature of the nucleon by deriving the proton rest mass and the confining force from holographic considerations. In future publications we will address the confinement string-like gluon jet flux tube structures of the QCD vacuum model as potentially arising from high curvature within the spacetime Planck vacuum collective behavior background, acting as vortices near the holographic screen topological horizon. This will be addressed utilizing an extended center vortex picture which has been significantly developed by ‘t Hooft  and in which the surface area of a Wilson loop is related to a confining force. In the next section, we explore the energy and angular frequency associated with our model and we compute the gravitational potential range of our confining force utilizing special relativity.
It has always been “as above, so below”.
Possibly, (maybe?), it would be healthy for our future, to finally go past what our ancestors already knew.
Yin Yang mapped onto Torus